UAV Operations Systems
Drone Builder News

Free AYNA Drone Builder Picks Motors, Propellers and Batteries for Custom Drones From Real Test Data

Builders set their payload and battery, and Drone Builder searches every compatible combination, ranks the results and prints a build sheet. AI assistants can use it too.

/ Press Release Drone Builder AYNA

NASHUA, N.H. — March 6, 2026 — UAV Operations Systems, LLC today introduced AYNA Drone Builder, a free web tool that helps people who build their own drones choose the motors, propellers, speed controllers, batteries and frame that work together. It is available now at build.ayna.com, with no account needed.

Choosing the parts for a custom drone is still mostly guesswork. Spec sheets list peak numbers, and forums give advice for someone else's aircraft. Builders find out whether a motor and propeller pair can lift the payload, how long the battery will last and whether the speed controller has enough headroom only after the parts arrive, sometimes when a part overheats in the air.

Drone Builder works from measurements instead. Its database holds more than 300 parts from manufacturers including T-Motor, EMAX, BrotherHobby, GEPRC, APC, Gemfan, HQProp, Tattu, Hobbywing, Holybro and Tarot, with more than 900 thrust-stand measurements published by motor makers. Where a manufacturer has not tested a combination, the engine estimates it from propeller wind-tunnel data published by the University of Illinois.

Finding the build. A builder sets the flight style, battery type and payload, and can fix any part already chosen. Drone Builder searches every compatible combination and ranks the results by flight time and efficiency, and by how much of each result comes from measured data rather than estimates.

Checking the build. Each result comes with a step-by-step checklist: whether the parts are compatible, whether the voltages match, how much current headroom the speed controller has and how much thrust margin the aircraft has over its weight. Each check shows its numbers. A builder can then print a build sheet with the configuration, expected performance and parts list for the bench. Parts that are not in the database can be entered by hand.

Asking an AI assistant. Drone Builder also runs an open Model Context Protocol server at build.ayna.com/mcp/, so AI assistants such as Claude can search the parts database, find the best combinations for a set of requirements and check a proposed build, using the same physics as the website. No sign-in is needed. Inside AYNA, TUCKER, the AI maintenance specialist, uses Drone Builder when a pilot asks about replacing or upgrading parts on an aircraft.

"I build and tune my own aircraft, and picking the propulsion system always meant spreadsheets and test flights," said Adonis Elfakih, founder and CEO of UAV Operations Systems and a Part 107 pilot. "Drone Builder starts from the manufacturers' own test data and shows its work, so builders can see why a combination is recommended before they buy anything."

Drone Builder is free at build.ayna.com. Pilots who fly their aircraft commercially can track them, their parts and their maintenance in AYNA at www.ayna.com.

About AYNA

AYNA is software for U.S. commercial drone pilots, from the newly certified to companies with several pilots. It puts the pilot's website, customer requests, bookings, payments, pilots, aircraft, missions, FAA compliance and maintenance in one place, with AI specialists that help while the pilot stays in charge. AYNA also offers free tools for any pilot, including Drone Builder and a Flight Log Analyzer for ArduPilot. AYNA is made by UAV Operations Systems, LLC, of Nashua, New Hampshire.

Brand names are trademarks of their respective owners. Their use does not imply endorsement.

Media contact
UAV Operations Systems, LLC
[email protected]

###