UAV Operations Systems
SkyRelay News

SkyRelay Lets Drone Operators Ask Claude, ChatGPT and Other AI Assistants About Their Aircraft

A read-only connection lets an AI assistant check a drone's battery, GPS and vibration, review past flights and compare flight-controller settings. It cannot fly the aircraft or change it.

/ Press Release SkyRelay

NASHUA, N.H. — Oct. 17, 2026 — UAV Operations Systems, LLC today made its SkyRelay drone connection available to AI assistants. Operators of ArduPilot and PX4 drones can now connect Claude, ChatGPT and other assistants to their SkyRelay account and ask about their aircraft in plain language: whether a drone is ready to fly, what happened on its last flight, or which setting changed since last week.

Answering those questions today means opening the ground control station, downloading logs and comparing parameter files by hand. Each answer is in the data, but it takes a technician's time to find it. SkyRelay already carries that data from the drone over LTE through a Conduit on the aircraft. Now an assistant can read it and do the looking.

An operator can ask "Is SC0042 online and ready to fly? Check its battery, GPS and vibration," and the assistant reads the live values from the drone: pack and cell voltages, current, temperature and estimated time left; GPS fix, including RTK float and fixed, satellite count and accuracy; vibration on each axis with accelerometer clipping; armed state, flight mode, firmware and any unhealthy sensors. It can also read any flight-controller parameter.

Recorded data works with the drone switched off. The assistant can list past flights with their duration, distance and maximum altitude, summarize one flight's battery and GPS behavior and mode changes, and read the parameter backup SkyRelay saves automatically at the start of every flight. An operator investigating a change in how a drone flies can ask the assistant to compare the battery settings from the last two flights and get the difference back in seconds.

The connection is read-only by design. The assistant cannot arm the drone, send flight commands, change flight modes or write parameters. Operators sign in to SkyRelay and approve access the first time they connect; there is no access key to copy or store. An assistant sees only the drones in that operator's account, and the operator can revoke it at any time from Connected Apps in the SkyRelay dashboard.

SkyRelay uses the Model Context Protocol, the open standard AI assistants use to connect to outside services. It works with Claude, ChatGPT, Claude Code, Cursor, Kimi Code and other clients that support remote MCP servers.

"Operators already have the data they need to answer most questions about their aircraft. It is spread across telemetry screens, logs and parameter files," said Adonis Elfakih, founder and CEO of UAV Operations Systems. "Now they can ask, and get an answer in a minute. And because the connection is read-only, the assistant can explain the aircraft but never operate it."

AI assistant access is available now and included with SkyRelay Link at no extra cost. Link is $25 per device in months the drone connects and $5 in months it does not. Each drone needs a SkyRelay Conduit, and live answers need the Conduit online with the flight controller connected. Setup takes three steps and is described at www.skyrelay.us/mcp.html.

About SkyRelay

SkyRelay connects MAVLink drones to their operators over LTE. Its Conduit firmware turns off-the-shelf cellular boards and Raspberry Pi into an onboard link that carries ground control station traffic over a private network, keeps an independent flight record off the aircraft and helps locate a downed drone. SkyRelay is made by UAV Operations Systems, LLC, of Nashua, New Hampshire. www.skyrelay.us

Claude is a trademark of Anthropic, PBC. ChatGPT is a trademark of OpenAI. Other names are trademarks of their respective owners.

Media contact
UAV Operations Systems, LLC
[email protected]

###