NASHUA, N.H. — Nov. 6, 2026 — UAV Operations Systems, LLC today announced Network RTK for SkyRelay, with corrections from RTKdata. Operators of ArduPilot drones can now receive centimeter-level positioning corrections on the aircraft over LTE, through the same SkyRelay connection that links their ground control station to the drone.
Survey, mapping, agriculture and inspection crews use RTK to place every image and every pass within a few centimeters. Getting the corrections to the drone is the hard part. Crews either set up and watch a base station on site, or sign up with a correction service, enter its settings in the ground control station and send the corrections up over the radio link. When the radio link fades at range or behind terrain, the corrections stop and accuracy drops.
SkyRelay takes the corrections off the radio link. A SkyRelay Conduit on the drone connects to the RTKdata network over its own LTE connection, reports the drone's position and passes the corrections to the flight controller over MAVLink. Nothing needs to be set up in Mission Planner or QGroundControl, and there is no separate correction-service login. The drone's fix status, from 3D to RTK Fix, shows live in the SkyRelay dashboard. The drone needs an RTK-capable GPS receiver.
RTKdata's network has more than 20,000 base stations in more than 140 countries. With an RTK fix, RTKdata specifies typical accuracy of 1 to 2 centimeters horizontally and 2 to 3 centimeters vertically.
For fleet managers, the same Conduit keeps the ground control station connected over LTE. Each laptop, tablet or phone that runs the ground control station is enrolled once in the fleet's SkyRelay private network, and it reaches the drones through that network rather than the open internet. The fleet owner decides which people can reach which drones and can remove a device at any time. In a PACE communications plan, Conduit is the alternate command link behind the drone's primary radio.
Conduit is SkyRelay's firmware running on off-the-shelf hardware: LilyGo T-SIM7600NA and T-PCIE cellular boards, and Raspberry Pi. Operators can buy a ready-to-fly kit or install the firmware on a board they already own. Conduit plugs into a spare MAVLink port on the flight controller and also keeps an independent flight record off the aircraft.
"RTKdata and UAV Operations Systems share a commitment to making centimeter-accurate GNSS positioning accessible to professionals worldwide," said Adonis Elfakih, founder and CEO of UAV Operations Systems. "Delivering it through Conduit makes deployment, licensing and credential management simple."
Network RTK is available now as an add-on to SkyRelay service at $35 per month per Conduit, with a 14-day free trial, bought in the SkyRelay app. Details are at www.skyrelay.us/rtk.html.
For customers with existing third-party NTRIP integrations, UAV Operations Systems also resells RTKdata NTRIP licenses in the United States.
About SkyRelay
SkyRelay connects MAVLink drones to their operators over LTE. Its Conduit firmware turns off-the-shelf cellular boards and Raspberry Pi into an onboard link that carries ground control station traffic over a private network, keeps an independent flight record off the aircraft and helps locate a downed drone. SkyRelay is made by UAV Operations Systems, LLC, of Nashua, New Hampshire. www.skyrelay.us
About RTKdata
RTKdata provides network RTK corrections from more than 20,000 base stations in more than 140 countries. RTKdata is operated by Kansi Solutions GmbH, Rotenberger Weg 24, 66640 Namborn, Germany.
Media contact
UAV Operations Systems, LLC
[email protected]
###